Données socles des Entrepôts de Données de Santé Hospitalier 0.1.0 - ci-build

Données socles des Entrepôts de Données de Santé Hospitalier - version de développement local (intégration continue v0.1.0) construite par les outils de publication FHIR (HL7® FHIR® Standard). Voir le répertoire des versions publiées

Resource Profile: EdshPatient - Detailed Descriptions

Draft as of 2026-11-20

Definitions for the edsh-patient resource profile.

Des conseils sur l'interprétation du contenu de ce tableau peuvent être trouvés ici on how to interpret the contents of this table

0. Patient
Définition

Demographics and other administrative information about an individual or animal receiving care or other health-related services.

CourtInformation about an individual or animal receiving health care services
Contrôle0..*
Est modificateurfalse
Résuméfalse
Noms alternatifsSubjectOfCare Client Resident
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Patient.implicitRules
Définition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

CourtA set of rules under which this content was created
Commentaires

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Contrôle0..1
Typeuri
Est modificateurtrue parce que This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Patient.extension:nationality
Nom de la slicenationality
Définition

The nationality of the patient.

CourtNationality
Contrôle0..1
Cet élément est affecté par les invariants suivants : ele-1
TypeExtension(FR Core Nationality Extension) (Extension complexe)
Est modificateurfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Patient.extension:identityReliability
Nom de la sliceidentityReliability
Définition

Reliabilility of the patient's identity | Précision sur le degré de fiabilité de l'identité du patient (si provisoire, validé... avec la justification : quelle type de pièce d'identité ?) avec la méthode de collection

CourtReliabilility of the identity | Fiabilité de l'identité
Contrôle0..*
Cet élément est affecté par les invariants suivants : ele-1
TypeExtension(FR Core Patient Ident Reliability Extension) (Extension complexe)
Est modificateurfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Patient.extension:deathPlace
Nom de la slicedeathPlace
Définition

Carries the death place of the patient |Précise le lieu de décès du patient (hôpital, sur la voie publique, au domicile, etc.).

CourtFR Core Patient Death Place Extension
Contrôle0..1
Cet élément est affecté par les invariants suivants : ele-1
TypeExtension(FR Core Patient Death Place Extension) (Type d'extension : string)
Est modificateurfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Patient.extension:birthdateUpdateIndicator
Nom de la slicebirthdateUpdateIndicator
Définition

An Extension

CourtFR Core Patient Birthdate Update Indicator Extension
Contrôle0..1
Cet élément est affecté par les invariants suivants : ele-1
TypeExtension(FR Core Patient Birthdate Update Indicator Extension) (Type d'extension : boolean)
Est modificateurfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Patient.extension:birthPlace
Nom de la slicebirthPlace
Définition

The registered place of birth of the patient. A sytem may use the address.text if they don't store the birthPlace address in discrete elements.

CourtPlace of Birth for patient
Contrôle0..1
TypeExtension(Patient Birth Place) (Type d'extension : Address)
Est modificateurfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Patient.extension:birthPlace.extension
Définition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CourtExtensionAdditional content defined by implementations
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..0*
TypeExtension
Est modificateurfalse
Résuméfalse
Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingCet élément introduit un ensemble de slices sur Patient.extension.extension. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ url
16. Patient.extension:birthPlace.url
Définition

Source of the definition for the extension code - a logical name or a URL.

Courtidentifies the meaning of the extension
Commentaires

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Contrôle1..1
Typeuri
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
Valeur fixe
{
  "url" : "http://hl7.org/fhir/StructureDefinition/patient-birthPlace"
}
<url value="http://hl7.org/fhir/StructureDefinition/patient-birthPlace"/>
18. Patient.extension:birthPlace.value[x]
Définition

An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

CourtAn address expressed using postal conventions (as opposed to GPS or other location definition formats)Value of extension
Commentaires

Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).

Contrôle10..1
Cet élément est affecté par les invariants suivants : ele-1
TypeAddress(FR Core Address Profile The snapshot does not say whether the constraints on the root of this type profile have been applied to this element, so assume they have not. Check the type profile directly as well), date, Meta, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
Note [x]VoirChoix de types de donnéespour plus d'informations sur l'utilisation de [x]
Est modificateurfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Patient.modifierExtension
Définition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

CourtExtensions that cannot be ignored
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurtrue parce que Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Résuméfalse
Exigences

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Patient.identifier
Définition

An identifier for this patient.

CourtAn identifier for this patient | Identifiant patient. Pour modéliser un patient avec une INS validée, il est nécessaire de respecter la conformité au profil FrCorePatientINS. Les identifiants NIR et NIA ne sont définis uniquement dans le cas du FRCorePatientINS.
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..*
TypeIdentifier
Est modificateurfalse
Résumétrue
Exigences

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingCet élément introduit un ensemble de slices sur Patient.identifier. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ type

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

24. Patient.identifier:NSS
Nom de la sliceNSS
Définition

An identifier for this patient.

CourtNational Health Plan Identifier | Le Numéro d'Inscription au Répertoire (NIR) de facturation permet de faire transiter le numéro de sécurité social de l’ayant droit ou du bénéfiaire (patient) / le numéro de sécurité sociale de l’ouvrant droit (assuré).An identifier for this patient
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..1*
TypeIdentifier
Est modificateurfalse
Résumétrue
Exigences

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Patient.identifier:NSS.use
Définition

The purpose of this identifier.

Courtusual | official | temp | secondary | old (If known)
Commentaires

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Valeur de motif
{
  "use" : "official"
}
<use value="official"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Patient.identifier:NSS.type
Définition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

CourtDescription of identifier
Commentaires

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Contrôle10..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type|4.0.1
(extensible to http://hl7.org/fhir/ValueSet/identifier-type)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Est modificateurfalse
Résumétrue
Exigences

Allows users to make use of identifiers when the identifier system is not known.

Valeur de motif
{
  "coding" : [
    {
      "system" : "http://terminology.hl7.org/CodeSystem/v2-0203",
      "code" : "NH"
    }
  ]
}
<type>
  <coding>
    <system value="http://terminology.hl7.org/CodeSystem/v2-0203"/>
    <code value="NH"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Patient.identifier:NSS.system
Définition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

CourtThe namespace for the identifier value
Commentaires

Identifier.system is always case sensitive.

Contrôle0..1
Typeuri
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Valeur de motif
{
  "system" : "urn:oid:1.2.250.1.213.1.4.8"
}
<system value="urn:oid:1.2.250.1.213.1.4.8"/>
ExempleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Patient.identifier:NSS.value
Définition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

CourtThe value that is unique
Commentaires

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Contrôle10..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
ExempleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Patient.identifier:INS-C
Nom de la sliceINS-C
Définition

An identifier for this patient.

CourtComputed National Health Identifier | Identifiant National de Santé Calculé à partir des éléments de la carte vitaleAn identifier for this patient
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..*
TypeIdentifier
Est modificateurfalse
Résumétrue
Exigences

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Patient.identifier:INS-C.use
Définition

The purpose of this identifier.

Courtusual | official | temp | secondary | old (If known)
Commentaires

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Valeur de motif
{
  "use" : "secondary"
}
<use value="secondary"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Patient.identifier:INS-C.type
Définition

Computed National Health Identifier | Identifiant National de Santé Calculé à partir des éléments de la carte vitale


A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

CourtDescription of identifier
Commentaires

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Contrôle10..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type|4.0.1
(extensible to http://hl7.org/fhir/ValueSet/identifier-type)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Est modificateurfalse
Résumétrue
Exigences

Allows users to make use of identifiers when the identifier system is not known.

Valeur de motif
{
  "coding" : [
    {
      "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
      "code" : "INS-C",
      "display" : "Identifiant National de Santé Calculé"
    }
  ]
}
<type>
  <coding>
    <system value="https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203"/>
    <code value="INS-C"/>
    <display value="Identifiant National de Santé Calculé"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Patient.identifier:INS-C.system
Définition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

CourtThe namespace for the identifier value
Commentaires

Identifier.system is always case sensitive.

Contrôle0..1
Typeuri
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Valeur de motif
{
  "system" : "urn:oid:1.2.250.1.213.1.4.2"
}
<system value="urn:oid:1.2.250.1.213.1.4.2"/>
ExempleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Patient.identifier:INS-C.value
Définition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

CourtThe value that is unique
Commentaires

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Contrôle10..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
ExempleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Patient.identifier:NDP
Nom de la sliceNDP
Définition

An identifier for this patient.

CourtFrench pharmaceutical Record Identifier | Numéro de Dossier Pharmaceutique français. Celui-ci est unique.An identifier for this patient
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..1*
TypeIdentifier
Est modificateurfalse
Résumétrue
Exigences

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Patient.identifier:NDP.use
Définition

The purpose of this identifier.

Courtusual | official | temp | secondary | old (If known)
Commentaires

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Valeur de motif
{
  "use" : "secondary"
}
<use value="secondary"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Patient.identifier:NDP.type
Définition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

CourtDescription of identifier
Commentaires

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Contrôle10..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type|4.0.1
(extensible to http://hl7.org/fhir/ValueSet/identifier-type)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Est modificateurfalse
Résumétrue
Exigences

Allows users to make use of identifiers when the identifier system is not known.

Valeur de motif
{
  "coding" : [
    {
      "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
      "code" : "NDP",
      "display" : "Identifiant du patient au Dossier Pharmaceutique"
    }
  ]
}
<type>
  <coding>
    <system value="https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203"/>
    <code value="NDP"/>
    <display value="Identifiant du patient au Dossier Pharmaceutique"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Patient.identifier:NDP.system
Définition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

CourtThe namespace for the identifier value
Commentaires

Identifier.system is always case sensitive.

Contrôle10..1
Typeuri
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Valeur de motif
{
  "system" : "urn:oid:1.2.250.1.176.1.2"
}
<system value="urn:oid:1.2.250.1.176.1.2"/>
ExempleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Patient.identifier:NDP.value
Définition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

CourtThe value that is unique
Commentaires

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Contrôle10..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
ExempleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Patient.identifier:PI
Nom de la slicePI
Définition

An identifier for this patient.

CourtHospital assigned patient identifier | IPPAn identifier for this patient
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..*
TypeIdentifier
Est modificateurfalse
Résumétrue
Exigences

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Patient.identifier:PI.use
Définition

The purpose of this identifier.

Courtusual | official | temp | secondary | old (If known)
Commentaires

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Valeur de motif
{
  "use" : "usual"
}
<use value="usual"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Patient.identifier:PI.type
Définition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

CourtDescription of identifier
Commentaires

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Contrôle10..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type|4.0.1
(extensible to http://hl7.org/fhir/ValueSet/identifier-type)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Est modificateurfalse
Résumétrue
Exigences

Allows users to make use of identifiers when the identifier system is not known.

Valeur de motif
{
  "coding" : [
    {
      "system" : "http://terminology.hl7.org/CodeSystem/v2-0203",
      "code" : "PI",
      "display" : "Patient internal identifier"
    }
  ]
}
<type>
  <coding>
    <system value="http://terminology.hl7.org/CodeSystem/v2-0203"/>
    <code value="PI"/>
    <display value="Patient internal identifier"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Patient.identifier:PI.system
Définition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

CourtThe namespace for the identifier value
Commentaires

Identifier.system is always case sensitive.

Contrôle10..1
Typeuri
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

ExempleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. Patient.identifier:PI.value
Définition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

CourtThe value that is unique
Commentaires

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Contrôle10..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
ExempleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. Patient.identifier:RRI
Nom de la sliceRRI
Définition

An identifier for this patient.

CourtRegional Registry ID | Identifiant régionalAn identifier for this patient
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..*
TypeIdentifier
Est modificateurfalse
Résumétrue
Exigences

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Patient.identifier:RRI.use
Définition

The purpose of this identifier.

Courtusual | official | temp | secondary | old (If known)
Commentaires

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Valeur de motif
{
  "use" : "secondary"
}
<use value="secondary"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Patient.identifier:RRI.type
Définition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

CourtDescription of identifier
Commentaires

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Contrôle10..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type|4.0.1
(extensible to http://hl7.org/fhir/ValueSet/identifier-type)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Est modificateurfalse
Résumétrue
Exigences

Allows users to make use of identifiers when the identifier system is not known.

Valeur de motif
{
  "coding" : [
    {
      "system" : "http://terminology.hl7.org/CodeSystem/v2-0203",
      "code" : "RRI",
      "display" : "Regional registry ID"
    }
  ]
}
<type>
  <coding>
    <system value="http://terminology.hl7.org/CodeSystem/v2-0203"/>
    <code value="RRI"/>
    <display value="Regional registry ID"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Patient.identifier:RRI.system
Définition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

CourtThe namespace for the identifier value
Commentaires

Identifier.system is always case sensitive.

Contrôle10..1
Typeuri
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

ExempleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Patient.identifier:RRI.value
Définition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

CourtThe value that is unique
Commentaires

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Contrôle10..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
ExempleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Patient.identifier:INS-NIR
Nom de la sliceINS-NIR
Définition

An identifier for this patient.

CourtINS-NIR - The patient national health identifier INS obtained by requesting the national patient identification service (CNAM) called the INSi teleservice. Identifiant national de santé (NIR) du patient INS provenant du téléservice INSi (service national d'identification des patients (CNAM))An identifier for this patient
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..*
TypeIdentifier
Est modificateurfalse
Résumétrue
Exigences

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Patient.identifier:INS-NIR.use
Définition

The purpose of this identifier.

Courtusual | official | temp | secondary | old (If known)
Commentaires

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Valeur de motif
{
  "use" : "official"
}
<use value="official"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. Patient.identifier:INS-NIR.type
Définition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

CourtDescription of identifier
Commentaires

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Contrôle10..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type|4.0.1
(extensible to http://hl7.org/fhir/ValueSet/identifier-type|4.0.1)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Est modificateurfalse
Résumétrue
Exigences

Allows users to make use of identifiers when the identifier system is not known.

Valeur de motif
{
  "coding" : [
    {
      "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
      "code" : "INS-NIR"
    }
  ]
}
<type>
  <coding>
    <system value="https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203"/>
    <code value="INS-NIR"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. Patient.identifier:INS-NIR.system
Définition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

CourtAutorité d'affectation des INS-NIRThe namespace for the identifier value
Commentaires

Identifier.system is always case sensitive.

Contrôle0..1
Typeuri
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Valeur de motif
{
  "system" : "urn:oid:1.2.250.1.213.1.4.8"
}
<system value="urn:oid:1.2.250.1.213.1.4.8"/>
ExempleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. Patient.identifier:INS-NIR.value
Définition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

CourtThe value that is unique
Commentaires

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Contrôle10..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
ExempleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Patient.active
Définition

Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

It is often used to filter patient lists to exclude inactive patients

Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

CourtWhether this patient's record is in active use
Commentaires

If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

Contrôle0..1
Typeboolean
Est modificateurtrue parce que This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Need to be able to mark a patient record as not to be used because it was created in error.

Signification si manquantThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. Patient.name
Définition

A name associated with the individual.

CourtA name associated with the patient
Commentaires

A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Contrôle0..*
TypeHumanName(FR Core Human Name Profile The snapshot does not say whether the constraints on the root of this type profile have been applied to this element, so assume they have not. Check the type profile directly as well)
Est modificateurfalse
Résumétrue
Exigences

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingCet élément introduit un ensemble de slices sur Patient.name. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ use

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

88. Patient.name:usualName
Nom de la sliceusualName
Définition

A human's name with the ability to identify parts and usage | Le nom utilisé (usual) n’est transmis que s’il est défini (par exemple nom marital du conjoint).


A name associated with the individual.

CourtName of a human | Nom utiliséA name associated with the patient
Commentaires

A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Contrôle0..*
TypeHumanName
Est modificateurfalse
Résumétrue
Exigences

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Patient.name:usualName.use
Définition

Identifies the purpose for this name.

Courtusual | official | temp | nickname | anonymous | old | maiden
Commentaires

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Contrôle10..1
BindingLes codes DOIVENT (SHALL) être pris de NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

The use of a human name.

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Valeur de motif
{
  "use" : "usual"
}
<use value="usual"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Patient.name:officialName
Nom de la sliceofficialName
Définition

A human's name with the ability to identify parts and usage | Le nom de naissance (official) est obligatoire dans le cas où l’on véhicule l’INS et que l’identité est qualifiée (celui-ci ne doit pas être altéré).


A name associated with the individual.

CourtName of a human | Nom de naissanceA name associated with the patient
Commentaires

A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Contrôle0..*
TypeHumanName
Est modificateurfalse
Résumétrue
Exigences

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. Patient.name:officialName.extension:birth-list-given-name
Nom de la slicebirth-list-given-name
Définition

Prénoms de l'acte de naissance

CourtDans le cas d’une identité créée ou modifiée par un appel au téléservice INSi, il s’agit de la liste des prénoms retournée par le téléservice. Ce composant contient tous les prénoms du patient, y compris le premier, que l'on retrouve également dans le champ name.given. Il s'agit de la liste des prénoms du patient, qu'elle soit issue d'une saisie locale ou du retour à l'appel au téléservice INSi. Conformément aux spécifications INS, cette liste est constituée des prénoms, séparés par des espaces.
Contrôle0..1
TypeExtension(FR Core Patient Birth List Given name Extension) (Type d'extension : string)
Est modificateurfalse
Résuméfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
96. Patient.name:officialName.use
Définition

Identifies the purpose for this name.

Courtusual | official | temp | nickname | anonymous | old | maiden
Commentaires

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Contrôle10..1
BindingLes codes DOIVENT (SHALL) être pris de NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

The use of a human name.

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Valeur de motif
{
  "use" : "official"
}
<use value="official"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. Patient.name:officialName.family
Définition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

CourtFamily name (often called 'Surname')
Commentaires

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Contrôle10..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Noms alternatifssurname
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. Patient.name:officialName.given
Définition

Given name.

CourtGiven names (not always 'first'). Includes middle names
Commentaires

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Contrôle10..*
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Noms alternatifsfirst name, middle name
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. Patient.gender
Définition

French patient's gender checked with the INSi teleservice | Genre du patient. Dans le cas d'une identité récupérée par le téléservice INSi, les valeurs sont M ou F


Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

Courtmale | female | unknownmale | female | other | unknown
Commentaires

The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de FR Core ValueSet Patient gender INS ValueSethttp://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
(required to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-patient-gender-INS)
Typecode
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Needed for identification of the individual, in combination with (at least) name and birth date.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. Patient.deceased[x]
Définition

Indicates if the individual is deceased or not.

CourtStatut ou date de décès du patientIndicates if the individual is deceased or not
Commentaires

If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

Contrôle0..1
TypeChoix de : boolean, dateTime
Note [x]VoirChoix de types de donnéespour plus d'informations sur l'utilisation de [x]
Est modificateurtrue parce que This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Patient.deceased[x].extension:DeathSource
Nom de la sliceDeathSource
Définition

Cette extension permet de formaliser la source d'information de laquelle est issue le statu vital du patient tel que renseigné dans Patien.deceased[x]

CourtSource de l'information de décès (état civil, hôpital, INSEE…)
Contrôle0..1
TypeExtension(Source ayant fournie l'information de décès) (Type d'extension : code)
Est modificateurfalse
Résuméfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
108. Patient.address
Définition

An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.


An address for the individual.

CourtAdresse du patient, avec géolocalisation et code géographique PMSIAn address for the individual
Commentaires

Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).


Patient may have multiple addresses with different uses or applicable periods.

Contrôle0..*
Cet élément est affecté par les invariants suivants : ele-1
TypeAddress(Address)
Est modificateurfalse
Exigences

May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
110. Patient.link
Définition

Link to another patient resource that concerns the same actual patient.

CourtLink to another patient resource that concerns the same actual person
Commentaires

There is no assumption that linked patient records have mutual links.

Contrôle0..*
TypeBackboneElement
Est modificateurtrue parce que This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
Résumétrue
Exigences

There are multiple use cases:

  • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
  • Distribution of patient information across multiple servers.
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
112. Patient.link.modifierExtension
Définition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

CourtExtensions that cannot be ignored even if unrecognized
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurtrue parce que Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumétrue
Exigences

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Noms alternatifsextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
114. Patient.link.other
Définition

The other patient resource that the link refers to.

CourtAutre ressource Patient ou RelatedPerson liée à ce patientThe other patient or related person resource that the link refers to
Commentaires

Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

Contrôle1..1
TypeReference(Patient, RelatedPerson, FR Core Patient Profile, FR Core Related Person Profile, Patient, Patient, RelatedPerson)
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. Patient.link.type
Définition

The type of link between this patient resource and another patient resource.

Courtreplaced-by | replaces | refer | seealso
Contrôle1..1
BindingLes codes DOIVENT (SHALL) être pris de LinkTypehttp://hl7.org/fhir/ValueSet/link-type|4.0.1
(required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

The type of link between this patient resource and another patient resource.

Typecode
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Des conseils sur l'interprétation du contenu de ce tableau peuvent être trouvés ici on how to interpret the contents of this table

0. Patient
2. Patient.identifier:INS-NIR
Nom de la sliceINS-NIR
CourtINS-NIR - The patient national health identifier INS obtained by requesting the national patient identification service (CNAM) called the INSi teleservice. Identifiant national de santé (NIR) du patient INS provenant du téléservice INSi (service national d'identification des patients (CNAM))
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..*
4. Patient.identifier:INS-NIR.use
Valeur de motif
{
  "use" : "official"
}
<use value="official"/>
6. Patient.identifier:INS-NIR.type
Contrôle1..?
Valeur de motif
{
  "coding" : [
    {
      "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
      "code" : "INS-NIR"
    }
  ]
}
<type>
  <coding>
    <system value="https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203"/>
    <code value="INS-NIR"/>
  </coding>
</type>
8. Patient.identifier:INS-NIR.system
CourtAutorité d'affectation des INS-NIR
Valeur de motif
{
  "system" : "urn:oid:1.2.250.1.213.1.4.8"
}
<system value="urn:oid:1.2.250.1.213.1.4.8"/>
10. Patient.identifier:INS-NIR.value
Contrôle1..?
12. Patient.gender
Courtmale | female | unknown
BindingLes codes DOIVENT (SHALL) être pris de FR Core ValueSet Patient gender INS ValueSet
(required to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-patient-gender-INS)
14. Patient.deceased[x]
CourtStatut ou date de décès du patient
Note [x]VoirChoix de types de donnéespour plus d'informations sur l'utilisation de [x]
16. Patient.deceased[x].extension:DeathSource
Nom de la sliceDeathSource
CourtSource de l'information de décès (état civil, hôpital, INSEE…)
Contrôle0..1
TypeExtension(Source ayant fournie l'information de décès) (Type d'extension : code)
18. Patient.address
CourtAdresse du patient, avec géolocalisation et code géographique PMSI
TypeAddress(Address)
20. Patient.link
22. Patient.link.other
CourtAutre ressource Patient ou RelatedPerson liée à ce patient
TypeReference(Patient, RelatedPerson, FR Core Patient Profile, FR Core Related Person Profile, Patient)

Des conseils sur l'interprétation du contenu de ce tableau peuvent être trouvés ici on how to interpret the contents of this table

0. Patient
Définition

Demographics and other administrative information about an individual or animal receiving care or other health-related services.

CourtInformation about an individual or animal receiving health care services
Contrôle0..*
Est modificateurfalse
Résuméfalse
Noms alternatifsSubjectOfCare Client Resident
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Patient.id
Définition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

CourtLogical id of this artifact
Commentaires

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Contrôle0..1
Typeid
Est modificateurfalse
Résumétrue
4. Patient.meta
Définition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

CourtMetadata about the resource
Contrôle0..1
TypeMeta
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Patient.meta.id
Définition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CourtUnique id for inter-element referencing
Contrôle0..1
Typestring
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
8. Patient.meta.extension
Définition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CourtAdditional content defined by implementations
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurfalse
Résuméfalse
Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingCet élément introduit un ensemble de slices sur Patient.meta.extension. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ url
10. Patient.meta.versionId
Définition

The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

CourtVersion specific identifier
Commentaires

The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

Contrôle0..1
Typeid
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Patient.meta.lastUpdated
Définition

When the resource last changed - e.g. when the version changed.

CourtWhen the resource version last changed
Commentaires

This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

Contrôle0..1
Typeinstant
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Patient.meta.source
Définition

A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

CourtIdentifies where the resource comes from
Commentaires

In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

Contrôle0..1
Typeuri
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Patient.meta.profile
Définition

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

CourtProfiles this resource claims to conform to
Commentaires

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

Contrôle0..*
Typecanonical(StructureDefinition)
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingCet élément introduit un ensemble de slices sur Patient.meta.profile. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ $this
18. Patient.meta.profile:fr-canonical
Nom de la slicefr-canonical
Définition

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

CourtProfiles this resource claims to conform to
Commentaires

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

Contrôle0..1
Typecanonical(StructureDefinition)
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Valeur de motif
{
  "profile" : "https://hl7.fr/ig/fhir/core/StructureDefinition/fr-core-patient"
}
<profile value="https://hl7.fr/ig/fhir/core/StructureDefinition/fr-core-patient"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Patient.meta.security
Définition

Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

CourtSecurity Labels applied to this resource
Commentaires

The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

Contrôle0..*
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de All Security Labels
(extensible to http://hl7.org/fhir/ValueSet/security-labels)

Security Labels from the Healthcare Privacy and Security Classification System.

TypeCoding
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Patient.meta.tag
Définition

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

CourtTags applied to this resource
Commentaires

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

Contrôle0..*
BindingPour des exemples de codes, voir CommonTags
(example to http://hl7.org/fhir/ValueSet/common-tags)

Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

TypeCoding
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Patient.implicitRules
Définition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

CourtA set of rules under which this content was created
Commentaires

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Contrôle0..1
Typeuri
Est modificateurtrue parce que This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Patient.language
Définition

The base language in which the resource is written.

CourtLanguage of the resource content
Commentaires

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Contrôle0..1
BindingLes codes DEVRAIENT (SHOULD) être pris de CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages)

A human language.

Bindings AdditionnelsBut
AllLanguagesBinding Max
Typecode
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résuméfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Patient.text
Définition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

CourtText summary of the resource, for human interpretation
Commentaires

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Contrôle0..1
TypeNarrative
Est modificateurfalse
Résuméfalse
Noms alternatifsnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Patient.contained
Définition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

CourtContained, inline Resources
Commentaires

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Contrôle0..*
TypeResource
Est modificateurfalse
Résuméfalse
Noms alternatifsinline resources, anonymous resources, contained resources
32. Patient.extension
Définition

An Extension

CourtExtension
Contrôle0..*
TypeExtension
Est modificateurfalse
Résuméfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingCet élément introduit un ensemble de slices sur Patient.extension. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ url
34. Patient.extension:nationality
Nom de la slicenationality
Définition

The nationality of the patient.

CourtNationality
Contrôle0..1
Cet élément est affecté par les invariants suivants : ele-1
TypeExtension(FR Core Nationality Extension) (Extension complexe)
Est modificateurfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
36. Patient.extension:identityReliability
Nom de la sliceidentityReliability
Définition

Reliabilility of the patient's identity | Précision sur le degré de fiabilité de l'identité du patient (si provisoire, validé... avec la justification : quelle type de pièce d'identité ?) avec la méthode de collection

CourtReliabilility of the identity | Fiabilité de l'identité
Contrôle0..*
Cet élément est affecté par les invariants suivants : ele-1
TypeExtension(FR Core Patient Ident Reliability Extension) (Extension complexe)
Est modificateurfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. Patient.extension:deathPlace
Nom de la slicedeathPlace
Définition

Carries the death place of the patient |Précise le lieu de décès du patient (hôpital, sur la voie publique, au domicile, etc.).

CourtFR Core Patient Death Place Extension
Contrôle0..1
Cet élément est affecté par les invariants suivants : ele-1
TypeExtension(FR Core Patient Death Place Extension) (Type d'extension : string)
Est modificateurfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
40. Patient.extension:birthdateUpdateIndicator
Nom de la slicebirthdateUpdateIndicator
Définition

An Extension

CourtFR Core Patient Birthdate Update Indicator Extension
Contrôle0..1
Cet élément est affecté par les invariants suivants : ele-1
TypeExtension(FR Core Patient Birthdate Update Indicator Extension) (Type d'extension : boolean)
Est modificateurfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
42. Patient.extension:birthPlace
Nom de la slicebirthPlace
Définition

The registered place of birth of the patient. A sytem may use the address.text if they don't store the birthPlace address in discrete elements.

CourtPlace of Birth for patient
Contrôle0..1
TypeExtension(Patient Birth Place) (Type d'extension : Address)
Est modificateurfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
44. Patient.extension:birthPlace.id
Définition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CourtUnique id for inter-element referencing
Contrôle0..1
Cet élément est affecté par les invariants suivants : ele-1
Typeid
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
46. Patient.extension:birthPlace.extension
Définition

An Extension

CourtExtension
Contrôle0..0
TypeExtension
Est modificateurfalse
Résuméfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingCet élément introduit un ensemble de slices sur Patient.extension.extension. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ url
48. Patient.extension:birthPlace.url
Définition

Source of the definition for the extension code - a logical name or a URL.

Courtidentifies the meaning of the extension
Commentaires

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Contrôle1..1
Typeuri
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
Valeur fixe
{
  "url" : "http://hl7.org/fhir/StructureDefinition/patient-birthPlace"
}
<url value="http://hl7.org/fhir/StructureDefinition/patient-birthPlace"/>
50. Patient.extension:birthPlace.value[x]
Définition

An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.

CourtAn address expressed using postal conventions (as opposed to GPS or other location definition formats)
Commentaires

Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).

Contrôle1..1
Cet élément est affecté par les invariants suivants : ele-1
TypeAddress(FR Core Address Profile The snapshot does not say whether the constraints on the root of this type profile have been applied to this element, so assume they have not. Check the type profile directly as well)
Note [x]VoirChoix de types de donnéespour plus d'informations sur l'utilisation de [x]
Est modificateurfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Patient.modifierExtension
Définition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

CourtExtensions that cannot be ignored
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurtrue parce que Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Résuméfalse
Exigences

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
54. Patient.identifier
Définition

An identifier for this patient.

CourtAn identifier for this patient | Identifiant patient. Pour modéliser un patient avec une INS validée, il est nécessaire de respecter la conformité au profil FrCorePatientINS. Les identifiants NIR et NIA ne sont définis uniquement dans le cas du FRCorePatientINS.
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..*
TypeIdentifier
Est modificateurfalse
Résumétrue
Exigences

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingCet élément introduit un ensemble de slices sur Patient.identifier. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ type

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

56. Patient.identifier:NSS
Nom de la sliceNSS
Définition

An identifier for this patient.

CourtNational Health Plan Identifier | Le Numéro d'Inscription au Répertoire (NIR) de facturation permet de faire transiter le numéro de sécurité social de l’ayant droit ou du bénéfiaire (patient) / le numéro de sécurité sociale de l’ouvrant droit (assuré).
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..1
TypeIdentifier
Est modificateurfalse
Résumétrue
Exigences

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Patient.identifier:NSS.id
Définition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CourtUnique id for inter-element referencing
Contrôle0..1
Typestring
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
60. Patient.identifier:NSS.extension
Définition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CourtAdditional content defined by implementations
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurfalse
Résuméfalse
Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingCet élément introduit un ensemble de slices sur Patient.identifier.extension. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ url
62. Patient.identifier:NSS.use
Définition

The purpose of this identifier.

Courtusual | official | temp | secondary | old (If known)
Commentaires

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de IdentifierUse
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Valeur de motif
{
  "use" : "official"
}
<use value="official"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. Patient.identifier:NSS.type
Définition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

CourtDescription of identifier
Commentaires

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Contrôle1..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de Identifier Type Codes
(extensible to http://hl7.org/fhir/ValueSet/identifier-type)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Est modificateurfalse
Résumétrue
Exigences

Allows users to make use of identifiers when the identifier system is not known.

Valeur de motif
{
  "coding" : [
    {
      "system" : "http://terminology.hl7.org/CodeSystem/v2-0203",
      "code" : "NH"
    }
  ]
}
<type>
  <coding>
    <system value="http://terminology.hl7.org/CodeSystem/v2-0203"/>
    <code value="NH"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Patient.identifier:NSS.system
Définition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

CourtThe namespace for the identifier value
Commentaires

Identifier.system is always case sensitive.

Contrôle0..1
Typeuri
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Valeur de motif
{
  "system" : "urn:oid:1.2.250.1.213.1.4.8"
}
<system value="urn:oid:1.2.250.1.213.1.4.8"/>
ExempleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Patient.identifier:NSS.value
Définition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

CourtThe value that is unique
Commentaires

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Contrôle1..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
ExempleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Patient.identifier:NSS.period
Définition

Time period during which identifier is/was valid for use.

CourtTime period when id is/was valid for use
Contrôle0..1
TypePeriod
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Patient.identifier:NSS.assigner
Définition

Organization that issued/manages the identifier.

CourtOrganization that issued id (may be just text)
Commentaires

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Contrôle0..1
TypeReference(Organization)
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Patient.identifier:INS-C
Nom de la sliceINS-C
Définition

An identifier for this patient.

CourtComputed National Health Identifier | Identifiant National de Santé Calculé à partir des éléments de la carte vitale
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..*
TypeIdentifier
Est modificateurfalse
Résumétrue
Exigences

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Patient.identifier:INS-C.id
Définition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CourtUnique id for inter-element referencing
Contrôle0..1
Typestring
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
78. Patient.identifier:INS-C.extension
Définition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CourtAdditional content defined by implementations
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurfalse
Résuméfalse
Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingCet élément introduit un ensemble de slices sur Patient.identifier.extension. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ url
80. Patient.identifier:INS-C.use
Définition

The purpose of this identifier.

Courtusual | official | temp | secondary | old (If known)
Commentaires

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de IdentifierUse
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Valeur de motif
{
  "use" : "secondary"
}
<use value="secondary"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. Patient.identifier:INS-C.type
Définition

Computed National Health Identifier | Identifiant National de Santé Calculé à partir des éléments de la carte vitale

CourtDescription of identifier
Commentaires

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Contrôle1..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de Identifier Type Codes
(extensible to http://hl7.org/fhir/ValueSet/identifier-type)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Est modificateurfalse
Résumétrue
Exigences

Allows users to make use of identifiers when the identifier system is not known.

Valeur de motif
{
  "coding" : [
    {
      "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
      "code" : "INS-C",
      "display" : "Identifiant National de Santé Calculé"
    }
  ]
}
<type>
  <coding>
    <system value="https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203"/>
    <code value="INS-C"/>
    <display value="Identifiant National de Santé Calculé"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Patient.identifier:INS-C.system
Définition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

CourtThe namespace for the identifier value
Commentaires

Identifier.system is always case sensitive.

Contrôle0..1
Typeuri
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Valeur de motif
{
  "system" : "urn:oid:1.2.250.1.213.1.4.2"
}
<system value="urn:oid:1.2.250.1.213.1.4.2"/>
ExempleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. Patient.identifier:INS-C.value
Définition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

CourtThe value that is unique
Commentaires

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Contrôle1..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
ExempleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. Patient.identifier:INS-C.period
Définition

Time period during which identifier is/was valid for use.

CourtTime period when id is/was valid for use
Contrôle0..1
TypePeriod
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Patient.identifier:INS-C.assigner
Définition

Organization that issued/manages the identifier.

CourtOrganization that issued id (may be just text)
Commentaires

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Contrôle0..1
TypeReference(Organization)
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Patient.identifier:NDP
Nom de la sliceNDP
Définition

An identifier for this patient.

CourtFrench pharmaceutical Record Identifier | Numéro de Dossier Pharmaceutique français. Celui-ci est unique.
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..1
TypeIdentifier
Est modificateurfalse
Résumétrue
Exigences

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. Patient.identifier:NDP.id
Définition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CourtUnique id for inter-element referencing
Contrôle0..1
Typestring
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
96. Patient.identifier:NDP.extension
Définition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CourtAdditional content defined by implementations
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurfalse
Résuméfalse
Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingCet élément introduit un ensemble de slices sur Patient.identifier.extension. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ url
98. Patient.identifier:NDP.use
Définition

The purpose of this identifier.

Courtusual | official | temp | secondary | old (If known)
Commentaires

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de IdentifierUse
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Valeur de motif
{
  "use" : "secondary"
}
<use value="secondary"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. Patient.identifier:NDP.type
Définition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

CourtDescription of identifier
Commentaires

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Contrôle1..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de Identifier Type Codes
(extensible to http://hl7.org/fhir/ValueSet/identifier-type)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Est modificateurfalse
Résumétrue
Exigences

Allows users to make use of identifiers when the identifier system is not known.

Valeur de motif
{
  "coding" : [
    {
      "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
      "code" : "NDP",
      "display" : "Identifiant du patient au Dossier Pharmaceutique"
    }
  ]
}
<type>
  <coding>
    <system value="https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203"/>
    <code value="NDP"/>
    <display value="Identifiant du patient au Dossier Pharmaceutique"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. Patient.identifier:NDP.system
Définition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

CourtThe namespace for the identifier value
Commentaires

Identifier.system is always case sensitive.

Contrôle1..1
Typeuri
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Valeur de motif
{
  "system" : "urn:oid:1.2.250.1.176.1.2"
}
<system value="urn:oid:1.2.250.1.176.1.2"/>
ExempleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. Patient.identifier:NDP.value
Définition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

CourtThe value that is unique
Commentaires

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Contrôle1..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
ExempleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Patient.identifier:NDP.period
Définition

Time period during which identifier is/was valid for use.

CourtTime period when id is/was valid for use
Contrôle0..1
TypePeriod
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
108. Patient.identifier:NDP.assigner
Définition

Organization that issued/manages the identifier.

CourtOrganization that issued id (may be just text)
Commentaires

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Contrôle0..1
TypeReference(Organization)
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
110. Patient.identifier:PI
Nom de la slicePI
Définition

An identifier for this patient.

CourtHospital assigned patient identifier | IPP
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..*
TypeIdentifier
Est modificateurfalse
Résumétrue
Exigences

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
112. Patient.identifier:PI.id
Définition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CourtUnique id for inter-element referencing
Contrôle0..1
Typestring
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
114. Patient.identifier:PI.extension
Définition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CourtAdditional content defined by implementations
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurfalse
Résuméfalse
Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingCet élément introduit un ensemble de slices sur Patient.identifier.extension. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ url
116. Patient.identifier:PI.use
Définition

The purpose of this identifier.

Courtusual | official | temp | secondary | old (If known)
Commentaires

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de IdentifierUse
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Valeur de motif
{
  "use" : "usual"
}
<use value="usual"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. Patient.identifier:PI.type
Définition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

CourtDescription of identifier
Commentaires

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Contrôle1..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de Identifier Type Codes
(extensible to http://hl7.org/fhir/ValueSet/identifier-type)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Est modificateurfalse
Résumétrue
Exigences

Allows users to make use of identifiers when the identifier system is not known.

Valeur de motif
{
  "coding" : [
    {
      "system" : "http://terminology.hl7.org/CodeSystem/v2-0203",
      "code" : "PI",
      "display" : "Patient internal identifier"
    }
  ]
}
<type>
  <coding>
    <system value="http://terminology.hl7.org/CodeSystem/v2-0203"/>
    <code value="PI"/>
    <display value="Patient internal identifier"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
120. Patient.identifier:PI.system
Définition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

CourtThe namespace for the identifier value
Commentaires

Identifier.system is always case sensitive.

Contrôle1..1
Typeuri
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

ExempleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
122. Patient.identifier:PI.value
Définition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

CourtThe value that is unique
Commentaires

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Contrôle1..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
ExempleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
124. Patient.identifier:PI.period
Définition

Time period during which identifier is/was valid for use.

CourtTime period when id is/was valid for use
Contrôle0..1
TypePeriod
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
126. Patient.identifier:PI.assigner
Définition

Organization that issued/manages the identifier.

CourtOrganization that issued id (may be just text)
Commentaires

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Contrôle0..1
TypeReference(Organization)
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
128. Patient.identifier:RRI
Nom de la sliceRRI
Définition

An identifier for this patient.

CourtRegional Registry ID | Identifiant régional
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..*
TypeIdentifier
Est modificateurfalse
Résumétrue
Exigences

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
130. Patient.identifier:RRI.id
Définition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CourtUnique id for inter-element referencing
Contrôle0..1
Typestring
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
132. Patient.identifier:RRI.extension
Définition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CourtAdditional content defined by implementations
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurfalse
Résuméfalse
Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingCet élément introduit un ensemble de slices sur Patient.identifier.extension. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ url
134. Patient.identifier:RRI.use
Définition

The purpose of this identifier.

Courtusual | official | temp | secondary | old (If known)
Commentaires

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de IdentifierUse
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Valeur de motif
{
  "use" : "secondary"
}
<use value="secondary"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
136. Patient.identifier:RRI.type
Définition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

CourtDescription of identifier
Commentaires

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Contrôle1..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de Identifier Type Codes
(extensible to http://hl7.org/fhir/ValueSet/identifier-type)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Est modificateurfalse
Résumétrue
Exigences

Allows users to make use of identifiers when the identifier system is not known.

Valeur de motif
{
  "coding" : [
    {
      "system" : "http://terminology.hl7.org/CodeSystem/v2-0203",
      "code" : "RRI",
      "display" : "Regional registry ID"
    }
  ]
}
<type>
  <coding>
    <system value="http://terminology.hl7.org/CodeSystem/v2-0203"/>
    <code value="RRI"/>
    <display value="Regional registry ID"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
138. Patient.identifier:RRI.system
Définition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

CourtThe namespace for the identifier value
Commentaires

Identifier.system is always case sensitive.

Contrôle1..1
Typeuri
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

ExempleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
140. Patient.identifier:RRI.value
Définition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

CourtThe value that is unique
Commentaires

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Contrôle1..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
ExempleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
142. Patient.identifier:RRI.period
Définition

Time period during which identifier is/was valid for use.

CourtTime period when id is/was valid for use
Contrôle0..1
TypePeriod
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
144. Patient.identifier:RRI.assigner
Définition

Organization that issued/manages the identifier.

CourtOrganization that issued id (may be just text)
Commentaires

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Contrôle0..1
TypeReference(Organization)
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
146. Patient.identifier:INS-NIR
Nom de la sliceINS-NIR
Définition

An identifier for this patient.

CourtINS-NIR - The patient national health identifier INS obtained by requesting the national patient identification service (CNAM) called the INSi teleservice. Identifiant national de santé (NIR) du patient INS provenant du téléservice INSi (service national d'identification des patients (CNAM))
NoteCeci est un identifiant métier, pas un identifiant de ressource (voir discussion)
Contrôle0..*
TypeIdentifier
Est modificateurfalse
Résumétrue
Exigences

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
148. Patient.identifier:INS-NIR.id
Définition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CourtUnique id for inter-element referencing
Contrôle0..1
Typestring
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
150. Patient.identifier:INS-NIR.extension
Définition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CourtAdditional content defined by implementations
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurfalse
Résuméfalse
Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingCet élément introduit un ensemble de slices sur Patient.identifier.extension. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ url
152. Patient.identifier:INS-NIR.use
Définition

The purpose of this identifier.

Courtusual | official | temp | secondary | old (If known)
Commentaires

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de IdentifierUse
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Valeur de motif
{
  "use" : "official"
}
<use value="official"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
154. Patient.identifier:INS-NIR.type
Définition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

CourtDescription of identifier
Commentaires

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Contrôle1..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de Identifier Type Codes
(extensible to http://hl7.org/fhir/ValueSet/identifier-type|4.0.1)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Est modificateurfalse
Résumétrue
Exigences

Allows users to make use of identifiers when the identifier system is not known.

Valeur de motif
{
  "coding" : [
    {
      "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
      "code" : "INS-NIR"
    }
  ]
}
<type>
  <coding>
    <system value="https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203"/>
    <code value="INS-NIR"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
156. Patient.identifier:INS-NIR.system
Définition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

CourtAutorité d'affectation des INS-NIR
Commentaires

Identifier.system is always case sensitive.

Contrôle0..1
Typeuri
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Valeur de motif
{
  "system" : "urn:oid:1.2.250.1.213.1.4.8"
}
<system value="urn:oid:1.2.250.1.213.1.4.8"/>
ExempleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
158. Patient.identifier:INS-NIR.value
Définition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

CourtThe value that is unique
Commentaires

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Contrôle1..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
ExempleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
160. Patient.identifier:INS-NIR.period
Définition

Time period during which identifier is/was valid for use.

CourtTime period when id is/was valid for use
Contrôle0..1
TypePeriod
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
162. Patient.identifier:INS-NIR.assigner
Définition

Organization that issued/manages the identifier.

CourtOrganization that issued id (may be just text)
Commentaires

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Contrôle0..1
TypeReference(Organization)
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
164. Patient.active
Définition

Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

It is often used to filter patient lists to exclude inactive patients

Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

CourtWhether this patient's record is in active use
Commentaires

If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

Contrôle0..1
Typeboolean
Est modificateurtrue parce que This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Need to be able to mark a patient record as not to be used because it was created in error.

Signification si manquantThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
166. Patient.name
Définition

A name associated with the individual.

CourtA name associated with the patient
Commentaires

A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Contrôle0..*
TypeHumanName(FR Core Human Name Profile The snapshot does not say whether the constraints on the root of this type profile have been applied to this element, so assume they have not. Check the type profile directly as well)
Est modificateurfalse
Résumétrue
Exigences

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingCet élément introduit un ensemble de slices sur Patient.name. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ use

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

168. Patient.name:usualName
Nom de la sliceusualName
Définition

A human's name with the ability to identify parts and usage | Le nom utilisé (usual) n’est transmis que s’il est défini (par exemple nom marital du conjoint).

CourtName of a human | Nom utilisé
Commentaires

A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Contrôle0..*
TypeHumanName
Est modificateurfalse
Résumétrue
Exigences

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
170. Patient.name:usualName.id
Définition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CourtUnique id for inter-element referencing
Contrôle0..1
Typestring
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
172. Patient.name:usualName.extension
Définition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CourtAdditional content defined by implementations
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurfalse
Résuméfalse
Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingCet élément introduit un ensemble de slices sur Patient.name.extension. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ url
174. Patient.name:usualName.use
Définition

Identifies the purpose for this name.

Courtusual | official | temp | nickname | anonymous | old | maiden
Commentaires

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Contrôle1..1
BindingLes codes DOIVENT (SHALL) être pris de NameUse
(required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

The use of a human name.

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Valeur de motif
{
  "use" : "usual"
}
<use value="usual"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
176. Patient.name:usualName.text
Définition

Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

CourtText representation of the full name
Commentaires

Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Contrôle0..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

A renderable, unencoded form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
178. Patient.name:usualName.family
Définition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

CourtFamily name (often called 'Surname')
Commentaires

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Contrôle0..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Noms alternatifssurname
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
180. Patient.name:usualName.given
Définition

Given name.

CourtGiven names (not always 'first'). Includes middle names
Commentaires

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Contrôle0..*
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Noms alternatifsfirst name, middle name
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
182. Patient.name:usualName.prefix
Définition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

CourtParts that come before the name
Contrôle0..*
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
184. Patient.name:usualName.suffix
Définition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

CourtParts that come after the name
Contrôle0..*
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
186. Patient.name:usualName.period
Définition

Indicates the period of time when this name was valid for the named person.

CourtTime period when name was/is in use
Contrôle0..1
TypePeriod
Est modificateurfalse
Résumétrue
Exigences

Allows names to be placed in historical context.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
188. Patient.name:officialName
Nom de la sliceofficialName
Définition

A human's name with the ability to identify parts and usage | Le nom de naissance (official) est obligatoire dans le cas où l’on véhicule l’INS et que l’identité est qualifiée (celui-ci ne doit pas être altéré).

CourtName of a human | Nom de naissance
Commentaires

A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Contrôle0..*
TypeHumanName
Est modificateurfalse
Résumétrue
Exigences

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
190. Patient.name:officialName.id
Définition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CourtUnique id for inter-element referencing
Contrôle0..1
Typestring
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
192. Patient.name:officialName.extension
Définition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CourtAdditional content defined by implementations
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurfalse
Résuméfalse
Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingCet élément introduit un ensemble de slices sur Patient.name.extension. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ url
194. Patient.name:officialName.extension:birth-list-given-name
Nom de la slicebirth-list-given-name
Définition

Prénoms de l'acte de naissance

CourtDans le cas d’une identité créée ou modifiée par un appel au téléservice INSi, il s’agit de la liste des prénoms retournée par le téléservice. Ce composant contient tous les prénoms du patient, y compris le premier, que l'on retrouve également dans le champ name.given. Il s'agit de la liste des prénoms du patient, qu'elle soit issue d'une saisie locale ou du retour à l'appel au téléservice INSi. Conformément aux spécifications INS, cette liste est constituée des prénoms, séparés par des espaces.
Contrôle0..1
TypeExtension(FR Core Patient Birth List Given name Extension) (Type d'extension : string)
Est modificateurfalse
Résuméfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
196. Patient.name:officialName.use
Définition

Identifies the purpose for this name.

Courtusual | official | temp | nickname | anonymous | old | maiden
Commentaires

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Contrôle1..1
BindingLes codes DOIVENT (SHALL) être pris de NameUse
(required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

The use of a human name.

Typecode
Est modificateurtrue parce que This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Valeur de motif
{
  "use" : "official"
}
<use value="official"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
198. Patient.name:officialName.text
Définition

Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

CourtText representation of the full name
Commentaires

Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Contrôle0..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

A renderable, unencoded form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
200. Patient.name:officialName.family
Définition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

CourtFamily name (often called 'Surname')
Commentaires

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Contrôle1..1
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Noms alternatifssurname
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
202. Patient.name:officialName.given
Définition

Given name.

CourtGiven names (not always 'first'). Includes middle names
Commentaires

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Contrôle1..*
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Noms alternatifsfirst name, middle name
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
204. Patient.name:officialName.prefix
Définition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

CourtParts that come before the name
Contrôle0..*
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
206. Patient.name:officialName.suffix
Définition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

CourtParts that come after the name
Contrôle0..*
Typestring
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
208. Patient.name:officialName.period
Définition

Indicates the period of time when this name was valid for the named person.

CourtTime period when name was/is in use
Contrôle0..1
TypePeriod
Est modificateurfalse
Résumétrue
Exigences

Allows names to be placed in historical context.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
210. Patient.telecom
Définition

Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.

CourtDetails of a Technology mediated contact point (phone, fax, email, etc.)
Commentaires

A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

Contrôle0..*
Cet élément est affecté par les invariants suivants : ele-1
TypeContactPoint(FR Core Contact Point Profile The snapshot does not say whether the constraints on the root of this type profile have been applied to this element, so assume they have not. Check the type profile directly as well)
Est modificateurfalse
Exigences

People have (primary) ways to contact them in some way such as phone, email.

Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
212. Patient.gender
Définition

French patient's gender checked with the INSi teleservice | Genre du patient. Dans le cas d'une identité récupérée par le téléservice INSi, les valeurs sont M ou F

Courtmale | female | unknown
Commentaires

The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de FR Core ValueSet Patient gender INS ValueSet
(required to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-patient-gender-INS)
Typecode
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Needed for identification of the individual, in combination with (at least) name and birth date.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
214. Patient.birthDate
Définition

The date of birth for the individual.

CourtThe date of birth for the french patient checked with the INSitelservice | Date de naissance du patient. Dans le cas d'une identité récupérée du téléservice INSi, la date de naissance est modifiée selon les règles du RNIV dans le cas de dates exceptionnelles.
Commentaires

At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

Contrôle0..1
Typedate
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

Age of the individual drives many clinical processes.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
Code LOINC21112-8
216. Patient.deceased[x]
Définition

Indicates if the individual is deceased or not.

CourtStatut ou date de décès du patient
Commentaires

If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

Contrôle0..1
TypeChoix de : boolean, dateTime
Note [x]VoirChoix de types de donnéespour plus d'informations sur l'utilisation de [x]
Est modificateurtrue parce que This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Exigences

The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
218. Patient.deceased[x].id
Définition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CourtUnique id for inter-element referencing
Contrôle0..1
Typestring
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
220. Patient.deceased[x].extension
Définition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CourtAdditional content defined by implementations
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurfalse
Résuméfalse
Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingCet élément introduit un ensemble de slices sur Patient.deceased[x].extension. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ url
222. Patient.deceased[x].extension:DeathSource
Nom de la sliceDeathSource
Définition

Cette extension permet de formaliser la source d'information de laquelle est issue le statu vital du patient tel que renseigné dans Patien.deceased[x]

CourtSource de l'information de décès (état civil, hôpital, INSEE…)
Contrôle0..1
TypeExtension(Source ayant fournie l'information de décès) (Type d'extension : code)
Est modificateurfalse
Résuméfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
224. Patient.address
Définition

An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.

CourtAdresse du patient, avec géolocalisation et code géographique PMSI
Commentaires

Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).

Contrôle0..*
Cet élément est affecté par les invariants suivants : ele-1
TypeAddress(Address)
Est modificateurfalse
Exigences

May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
226. Patient.maritalStatus
Définition

This field contains a patient's most recent marital (civil) status.

CourtMarital (civil) status of a patient
Contrôle0..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de FR Core ValueSet Patient gender INS ValueSet
(extensible to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-marital-status)
TypeCodeableConcept
Est modificateurfalse
Résuméfalse
Exigences

Most, if not all systems capture it.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
228. Patient.multipleBirth[x]
Définition

Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

CourtWhether patient is part of a multiple birth
Commentaires

Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

Contrôle0..1
TypeChoix de : boolean, integer
Note [x]VoirChoix de types de donnéespour plus d'informations sur l'utilisation de [x]
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résuméfalse
Exigences

For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
230. Patient.photo
Définition

Image of the patient.

CourtImage of the patient
Commentaires

Guidelines:

  • Use id photos, not clinical photos.
  • Limit dimensions to thumbnail.
  • Keep byte count low to ease resource updates.
Contrôle0..*
TypeAttachment
Est modificateurfalse
Résuméfalse
Exigences

Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
232. Patient.contact
Définition

A contact party (e.g. guardian, partner, friend) for the patient.

CourtA contact party (e.g. guardian, partner, friend) for the patient
Commentaires

Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

Contrôle0..*
TypeBackboneElement
Est modificateurfalse
Résuméfalse
Exigences

Need to track people you can contact about the patient.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
234. Patient.contact.id
Définition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CourtUnique id for inter-element referencing
Contrôle0..1
Typestring
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
236. Patient.contact.extension
Définition

An Extension

CourtExtension
Contrôle0..*
TypeExtension
Est modificateurfalse
Résuméfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingCet élément introduit un ensemble de slices sur Patient.contact.extension. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ url
238. Patient.contact.extension:contactIdentifier
Nom de la slicecontactIdentifier
Définition

This extension carries the contact identifier in the patient resource | Ajout d'un identifiant de contact dans la ressource Patient

CourtContact identifier in the patient resource | Identifiant de contact dans la ressource Patient
Contrôle0..1
Cet élément est affecté par les invariants suivants : ele-1
TypeExtension(FR Core Patient Contact Identifier Extension) (Type d'extension : Identifier)
Est modificateurfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
240. Patient.contact.extension:comment
Nom de la slicecomment
Définition

add a comment on a dataElement of a resource | Ajout d'un commentaire sur un dataElement d'une ressource

CourtComment on a dataElement | Commentaire sur un dataElement
Contrôle0..1
Cet élément est affecté par les invariants suivants : ele-1
TypeExtension(FR Core Comment Extension) (Type d'extension : string)
Est modificateurfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
242. Patient.contact.modifierExtension
Définition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

CourtExtensions that cannot be ignored even if unrecognized
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurtrue parce que Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumétrue
Exigences

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Noms alternatifsextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
244. Patient.contact.relationship
Définition

The nature of the relationship between the patient and the contact person.

CourtThe kind of relationship
Contrôle0..*
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de PatientContactRelationship
(extensible to http://hl7.org/fhir/ValueSet/patient-contactrelationship)

The nature of the relationship between a patient and a contact person for that patient.

TypeCodeableConcept
Est modificateurfalse
Résuméfalse
Exigences

Used to determine which contact person is the most relevant to approach, depending on circumstances.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingCet élément introduit un ensemble de slices sur Patient.contact.relationship. Les slices sont Non ordonné et Open, et peut être différencié en utilisant les discriminateurs suivants :
  • value @ coding.system
246. Patient.contact.relationship:Role
Nom de la sliceRole
Définition

The nature of the relationship between the patient and the contact person.

CourtThe nature of the relationship. Rôle de la personne. Ex : personne de confiance, aidant ...
Contrôle0..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de FR Core ValueSet Patient contact role
(extensible to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-patient-contact-role)
TypeCodeableConcept
Est modificateurfalse
Résuméfalse
Exigences

Used to determine which contact person is the most relevant to approach, depending on circumstances.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
248. Patient.contact.relationship:RelationType
Nom de la sliceRelationType
Définition

The nature of the relationship between the patient and the contact person.

CourtThe nature of the relationship. Relation de la personne. Ex : Mère, époux, enfant ...
Contrôle0..1
BindingSauf si inapproprié, ces codes DOIVENT (SHALL) être pris de FR Core ValueSet relation type
(extensible to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-relation-type)
TypeCodeableConcept
Est modificateurfalse
Résuméfalse
Exigences

Used to determine which contact person is the most relevant to approach, depending on circumstances.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
250. Patient.contact.name
Définition

A human's name with the ability to identify parts and usage.

CourtName of a human - parts and usage
Commentaires

Names may be changed, or repudiated, or people may have different names in different contexts. Names may be divided into parts of different type that have variable significance depending on context, though the division into parts does not always matter. With personal names, the different parts might or might not be imbued with some implicit meaning; various cultures associate different importance with the name parts and the degree to which systems must care about name parts around the world varies widely.

Contrôle0..1
Cet élément est affecté par les invariants suivants : ele-1
TypeHumanName(FR Core Human Name Profile The snapshot does not say whether the constraints on the root of this type profile have been applied to this element, so assume they have not. Check the type profile directly as well)
Est modificateurfalse
Exigences

Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
252. Patient.contact.telecom
Définition

Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.

CourtDetails of a Technology mediated contact point (phone, fax, email, etc.)
Commentaires

Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

Contrôle0..*
Cet élément est affecté par les invariants suivants : ele-1
TypeContactPoint(FR Core Contact Point Profile The snapshot does not say whether the constraints on the root of this type profile have been applied to this element, so assume they have not. Check the type profile directly as well)
Est modificateurfalse
Exigences

People have (primary) ways to contact them in some way such as phone, email.

Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
254. Patient.contact.address
Définition

Address for the contact person.

CourtAddress for the contact person
Contrôle0..1
TypeAddress
Est modificateurfalse
Résuméfalse
Exigences

Need to keep track where the contact person can be contacted per postal mail or visited.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
256. Patient.contact.gender
Définition

Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes.

Courtmale | female | other | unknown
Contrôle0..1
BindingLes codes DOIVENT (SHALL) être pris de AdministrativeGender
(required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

The gender of a person used for administrative purposes.

Typecode
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résuméfalse
Exigences

Needed to address the person correctly.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
258. Patient.contact.organization
Définition

Organization on behalf of which the contact is acting or for which the contact is working.

CourtOrganization that is associated with the contact
Contrôle0..1
Cet élément est affecté par les invariants suivants : pat-1
TypeReference(Organization)
Est modificateurfalse
Résuméfalse
Exigences

For guardians or business related contacts, the organization is relevant.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
260. Patient.contact.period
Définition

The period during which this contact person or organization is valid to be contacted relating to this patient.

CourtThe period during which this contact person or organization is valid to be contacted relating to this patient
Contrôle0..1
TypePeriod
Est modificateurfalse
Résuméfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
262. Patient.communication
Définition

A language which may be used to communicate with the patient about his or her health.

CourtA language which may be used to communicate with the patient about his or her health
Commentaires

If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

Contrôle0..*
TypeBackboneElement
Est modificateurfalse
Résuméfalse
Exigences

If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
264. Patient.communication.id
Définition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CourtUnique id for inter-element referencing
Contrôle0..1
Typestring
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
266. Patient.communication.extension
Définition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CourtAdditional content defined by implementations
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurfalse
Résuméfalse
Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
268. Patient.communication.modifierExtension
Définition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

CourtExtensions that cannot be ignored even if unrecognized
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurtrue parce que Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumétrue
Exigences

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Noms alternatifsextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
270. Patient.communication.language
Définition

The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

CourtThe language which can be used to communicate with the patient about his or her health
Commentaires

The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

Contrôle1..1
BindingLes codes DEVRAIENT (SHOULD) être pris de CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages)

A human language.

Bindings AdditionnelsBut
AllLanguagesBinding Max
TypeCodeableConcept
Est modificateurfalse
Résuméfalse
Exigences

Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
272. Patient.communication.preferred
Définition

Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).

CourtLanguage preference indicator
Commentaires

This language is specifically identified for communicating healthcare information.

Contrôle0..1
Typeboolean
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résuméfalse
Exigences

People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
274. Patient.generalPractitioner
Définition

Patient's nominated care provider.

CourtPatient's nominated primary care provider
Commentaires

This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

Contrôle0..*
TypeReference(FR Core Practitioner Profile, FR Core Organization Profile, PractitionerRole)
Est modificateurfalse
Résuméfalse
Noms alternatifscareProvider
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
276. Patient.managingOrganization
Définition

Organization that is the custodian of the patient record.

CourtOrganization that is the custodian of the patient record
Commentaires

There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association).

Contrôle0..1
TypeReference(FR Core Organization Profile)
Est modificateurfalse
Résumétrue
Exigences

Need to know who recognizes this patient record, manages and updates it.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
278. Patient.link
Définition

Link to another patient resource that concerns the same actual patient.

CourtLink to another patient resource that concerns the same actual person
Commentaires

There is no assumption that linked patient records have mutual links.

Contrôle0..*
TypeBackboneElement
Est modificateurtrue parce que This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
Résumétrue
Exigences

There are multiple use cases:

  • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
  • Distribution of patient information across multiple servers.
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
280. Patient.link.id
Définition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CourtUnique id for inter-element referencing
Contrôle0..1
Typestring
Est modificateurfalse
Format XMLDans le format XML, cette propriété est représentée comme attribut.
Résuméfalse
282. Patient.link.extension
Définition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CourtAdditional content defined by implementations
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurfalse
Résuméfalse
Noms alternatifsextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
284. Patient.link.modifierExtension
Définition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

CourtExtensions that cannot be ignored even if unrecognized
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Contrôle0..*
TypeExtension
Est modificateurtrue parce que Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumétrue
Exigences

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Noms alternatifsextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
286. Patient.link.other
Définition

The other patient resource that the link refers to.

CourtAutre ressource Patient ou RelatedPerson liée à ce patient
Commentaires

Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

Contrôle1..1
TypeReference(Patient, RelatedPerson, FR Core Patient Profile, FR Core Related Person Profile, Patient)
Est modificateurfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
288. Patient.link.type
Définition

The type of link between this patient resource and another patient resource.

Courtreplaced-by | replaces | refer | seealso
Contrôle1..1
BindingLes codes DOIVENT (SHALL) être pris de LinkType
(required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

The type of link between this patient resource and another patient resource.

Typecode
Est modificateurfalse
Valeur primitiveCet élément primitif peut être présent, absent ou remplacé par une extension
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))